The method of connecting the bodies of electrically driven vehicles to a grounded earthing system with a conductor against any danger of electric leakage. electrical earthing It is called. In order for this system to work, the electrical resistance from the body of the electric vehicle to the ground must be low. The resistance of the earthing conductors is not a serious resistance. The actual resistance is the resistance from the grounding conductors buried in the ground to the ground. Soil is an infinitely large conductive mass.

In electrical networks grounding plantsis used to conduct short-circuit currents in a fault-free manner without endangering human life. Therefore, for earthing to be safe, the calculations must be made correctly and well designed.

Protective earthing is used to protect people against high contact voltage in high-voltage installations. The metallic surfaces of all electric vehicles that do not belong to the operating circuit, but which may remain under voltage in the event of a problem, are connected to a grounding earth using a grounding conductor.

Operation grounding is the grounding of a point of the operating circuit in electrical installations. For electric vehicles and installations this grounding is required.

In case of a fault, the current passes through the protective earth. However, a current can pass through the operating earth, even if there is no fault.

The purpose of earthing operations is to ensure that, in the event of an electrical leakage in an electric vehicle, the electric current passes over the ground line which has less resistance, not over people. This eliminates the risk of distortion. Grounding is done to prevent death events due to distortion.

For this purpose, the Ministry of Energy and Natural Resources Regulation on Grounding in Electrical Installations It has been omitted. This regulation has been prepared for the purpose of establishing, operating, controlling, and providing security in terms of life and property safety for alternating current and direct current electrical installations with a frequency below 100 Hz.

Since the high voltage electrical and low voltage electrical installations have different characteristics, the grounding methods and the grounding rules of the data processing and communication equipment are handled in separate sections.

Electrical power plants are facilities that enable the generation, accumulation, transmission, distribution of electricity and converting it into mechanical energy, light, chemical energy and similar energies. With these features, people can be dangerous in other situations, such as approaching or touching things. The phases whose active value is 1000 volts and below are defined as low voltage and the phases above this value are defined as high voltage. The voltage whose active value is above 50 volts at low voltage and which changes depending on the fault duration at high voltage is considered dangerous.

TÜRCERT certification body, as well as conformity assessment and certification studies, testing and inspection services also provides. If there is a need to get more information about the electrical grounding inspection or to have these inspections and controls done, TÜRCERT certification institution is ready to meet the needs of the enterprises with its experienced managers and employees.