Almost all of the machines used in industry and various sectors operate on electric power. Electricity has an important place in both industry and housing. Since it is a dangerous energy source, the current must be cut off and all precautions must be taken in the works carried out with electricity.

The main measures to be taken are to keep the electricity distribution tables and fuses in the workplaces in a closed environment and the floor of all panels are covered with a non-conductive insulating material. It is also another measure to have responsible personnel in the workplaces who understand electrical work and can respond quickly to possible failures.

Another precaution is to have the safety body grounding of all the machines and machines in the workplaces working with electricity. Body groundingis to be pulled separately from each machine or workbench other than panel grounding and grounding with grounding rods in an appropriate manner. Body groundings must be visible from the outside. This means that when looking at the machine or machine, a grounding line other than the normal power line should be seen. This is a must and issued by the Ministry of Energy and Natural Resources Regulation on Grounding in Electrical Installations this necessity.

Periodic inspection and controls of all kinds of earthing should be performed annually. This work must be carried out by a qualified electrician. To ensure a safe working environment, it is important that the grounding process is correctly performed.

Found in establishments machines and machine tools If they are not fixed and are intermittently displaced, in this case, grounded leads are kept in the columns in the workplaces since the body grounding line cannot be changed each time. The relays of the displaced machines or machines are secured by connecting these grounding terminals on a nearby column.

The Regulations on Occupational Health and Safety are required to be made in this way. Many occupational accidents are caused by ignorance. In this respect, employers have a responsibility to inform employees.

According to the legal regulations, all exposed conductive parts of the machines, which are jointly protected by the same protection device, must be connected to a grounding that is common to the protective conductors. If several protection devices are used in series, this requirement applies separately to all exposed conductive parts protected by each device. If the machines do not have neutral points or not, a phase conductor of each generator or transformer center must be earthed.

It is also necessary to test, measure and control the connection continuity of the protection conductors of the machines, the main and complementary potential equalization conductors. The highest resistance values ​​are shown in the regulation for the protection conductors.

TÜRCERT certification body, as well as conformity assessment and certification studies, testing and inspection services also provides. If there is a need to get more information about the grounding periodic inspection of the machines or to have these inspections and inspections, TÜRCERT certification institution is ready to meet the needs of the enterprises with its experienced managers and employees.